Combined rules
Execution | MM 44 | ||
Hardness | ~430 HV | ||
Bevel | A ( blade angle: 54° ) | ||
Thickness | 2pt / 0.71 mm | ||
Height | 21.30 - 25.40 mm / 0.840"-1.000" |
Rules for glue application
Execution | MM 44 | ||
Hardness | ~430 HV | ||
Bevel | A (blade angle: 54°) | ||
Thickness | 2pt / 0.71 mm | ||
Height | 23.50-23.60 mm | ||
Spacing | talas 5 mm (gap between blades) 2pt / 2pt 1 mm / 1 mm |
Helps with glue application on corrugated boards, and makes small perforations where the glue stays.
Corrugated rules/Rules for old photos
Execution | MM 40 | HP 40 | |
Hardness | ~380 HV | ~380 / 700 HV | |
Bevel | A (blade angle: 54° ) | ||
Thickness | 2 pt / 0.71 mm | ||
Height | 23.80 mm | ||
Spacing | wave: 5 mm 7 mm 10 mm irregular wave (rules for old photos) |
Used when the edge of the board needs to have an effect of equable amplitude wave / type of corrugated rule used for board edges in order to get an irregular amplitude wave so you get an old photograph or a card impression.
Zip rules
Execution | MM 34 | ||
Hardness | ~ 340 HV | ||
Bevel | A (blade angle: 54° ) | ||
Thickness | 2 pt / 0.71 mm | ||
Height | 21.80 mm | ||
Spacing | 6 mm 8 mm 10 mm |
Embeded in places where the box is supposed to be opened like a "zipper"
Labeling rules
Bevel | A / B | ||
Thickness | 0.4 mm, 0.5 mm | ||
Height | 12 mm |
Rules used for cutting self-adhesive stickers and tags.
Supra Z
Execution | Vikingflex 40 | ||
Hardness | ~ 380 HV | ||
Hardness edge | ~ 700 HV ( ~60 HRC ) | ||
Bevel | A, AA (blade angle: 42° ) | ||
Thickness | 2 pt / 0.71 mm | ||
Height | 23.80 mm |
A rule whose cutting edge is tempered with plasma and has an ultra sharp edge, suitable for tools used to cut plastic foil.
Micro top
Execution | HP 40 | ||
Bevel | A, AA (blade angle: 54° ) | ||
Thickness | 2 pt / 0.71 mm | ||
Height | 23.80 mm |
Cutting edge is tempered with plasma, which gives it special hardness, and elasticity to the body of the knife. Used for manufacturing tools intended for big series.